Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

On‐Premises Data Center

VMware vCenter Server

HTTPS Port

If using a firewall, HTTPS port 443 must be open.

JetStream DR Management Server Appliance (MSA)

Network

Static or dynamically assigned (DHCP) IP addresses can be used for the MSA interface. The FQDN should be registered with DNS.

Ports

When JetStream DR software is installed, a range of ports will automatically be opened on the source ESXi hosts. For most users, no additional action is necessary. In cases where the on-premises/source setup has special firewall rules blocking these ports, additional administrative steps will be needed to manually open these ports.

Port Range

32873-32878

JetDR network with the following characteristics must be established between the protected site and the recovery site:

Item

Comments

JetStream DR Management Server Appliance (MSA)

A management network is required for the MSA. This network is used for access to the JetStream DR RESTful APIs and making other data path calls. If a private network is available for connecting to the object store, this private network should be added to the MSA VM as a separate network. If no private network is available, make sure the management network can be used to connect to the object store.

Management Network:

Required

External Network:
(for object store access)

A dedicated external network can be used; otherwise, data traffic will be sent over the management network.

JetStream DR Virtual Appliance (DRVA)

If the only network used is the management network, make sure it has access to both IO Filter and the object store. If multiple networks exist within the cluster, all must be attached to the DRVA VMs.

Recovery from Object Cloud Virtual Appliance (RocVA)

If the only network used is the management network, make sure it has access to both the ESXi host(s) and the object store. If multiple networks exist within the cluster, all must be attached to the RocVA VM. The RocVA is a temporary VM that is automatically created when needed for VM recovery, then removed when it is no longer needed.

Object Store / Blob Storage

The object store/Blob Storage should be accessible to both the protected site and the recovery site.

Replication Log Store

DR Virtual Appliances (DRVAs) and ESXi host(s) must have direct access to this storage.

⚠︎ IMPORTANT: DHCP is required for use by all transient elements (i.e. RocVA, RVM)

NOTE: Any required ports (e.g. port 443) should be opened at the source, the destination, and at all points in between.


AVS Setup

AVS local traffic (within the same AVS Private Cloud)

JetStream MSA and vCenter: TCP 443

JetStream MSA and ESXi hosts (CIM Server): TCP 5989

JetStream IOFILTER Daemon listener port (ESXi host): TCP 32873

JetStream DRVA data path listener port: TCP 32877

JetStream DRVA REST endpoint port: TCP 32878

JetStream RecoverVA (Rehydration) REST endpoint port: TCP 32878

AVS to Azure/Internet 

JetStream MSA and Azure Storage Account: TCP 443

JetStream DRVA and Azure Storage Account: TCP 443

JetStream MSA and JetStream Azure website (jsdr-mms.azurewebsites.net): TCP 443

JetStream MSA, DRVA and DNS: TCP/UDP 53

  • No labels